Archive Custom Knife 
  Archive アーカイブ   過去に売れた ナイフ集
 Custom Knives Foreign  その他海外カスタム  Email: odclub2@yahoo.co.jp
   その他:ナイフ     OutDoor CLUB: HOME ←「What's New 」      

 
     販売中の 海外作家 カスタムナイフ
      ↑ TO Currently  selling custom knives  oversea maker

Custom Knives Archive Part2
   

 マスターブレードスミス(2代目ABS会長 )Jay Hendrickson 鍛造 ドロップポイントキャンプナイフ 刃長約:16cm 全長約:27.5cm 刃厚約:4.5mm 鋼材:?不明
 木目が良く出ているカーリーメープルハンドル 1991年製 ¥88000税込  受託販売終了  
 tenchoがカリフォルニアのハンマーインで教授していただいた先生です。優しい方なのですが、ボソボソと独り言を言っているように喋るので、聞き取り難くて言っていることがよくわからなかったことが思い出に残っています。
   欲しいなぁ~  ...tencho





  ナイフマガジン差し上げます ↓↓


   

 S.R. Johnson (Steven R. Johnson)  スティーブ・ジョンソン ニューヨーク スペシャル マンモスアイボリ 刃長約:8.5cm 全長約:18.7cm 刃厚約:5mm
¥550000 税込  Sold
  ラブレスのパートナー(Loveless-Johnson)だった スティーヴ・ジョンソンの NY Special です。
  ラブレスのNY Specialは、アメリカででは値段が大台(百萬円)越えも珍しくありません。メリットさんの Loveless "Knives" で、NY Special は$5000、約55万円です。(約70万円-2022/7/15)

    ほぼミントコンディション、 ボルスター部分にサッサ傷すこし有り。 


















                  TOP  へ  ジャンプ
  

 Three Sisters Forge スリー シスターズ フォージ  ” ビースト”  3” (7.6cm)ブレード、全長約:18.5cm  ↑チタンハンドル彫刻↑、 ミント 
  M390 ステンレス鋼: 1.9C、20Cr、0.4V、1Mo、0.7Si、0.6W、0.3Mn   ← 高級鋼材です。  税込¥48000 Sold

                   このシンプルさがいいなぁ ...  


 
  

  Tony Bose Wilfred, IN (Indiana) Fixed Blade Knife シースなし中古美品 ¥50000(税込¥55000)   受託品 Sold

トニー・ボーズさんは、スリップジョイントのポケットナイフで世界で最も有名な方です(でした。) 1本1500~3000ドルします。誰でも買えるわけではなく、ブレードショウでは、くじ引きで決まられます。
 アメリカのディーラーに言われたことがあります: 例えばくじに当たって、2000ドルで買ったとして、「欲しい人」と声を挙げれば、2600ドルで即売れるという話です。
 tencho は一度くじ引きで当たったにも関わらず、くじ引きの時間を間違えて、その場にいなかったため、買えなかったことがありました。
  時間すぎてから行ったら、岡安さんや寛生さんが、”あれ、さっき名前呼ばれてたぞ!” と...  死ぬほど悔しかった。 

   残念ながら トニーボーズさんは2020年11月22日(日) にお亡くなりになりました。74歳でした。

  

 Morseth モーゼス 1960年ごろの製作 刃長約14cm 全長約26cm  3 ピーススタッグ、オリジナルシース    ラミネートの筋が見えます。↑↑
  A.G.Russel のモーゼスではありません。 ハリーかスティーブ・モーゼスが作ったものです。
                                   
 ¥58000 (税込¥62640) 砥ぎべりあり。  税込¥33000 Sold

  さび取り磨き跡あり。




                   ↓↓ ベルトループ部分に ” MORSETH 三 ”



   Vintage Bob Dozier

 ヴィンテージ ボブ・ドージャー 1988年  鋼材:D2 全長約9cm 刃長約21.1cm   極上スタッグ  ¥70000(税込¥77000) Sold
  ボブ・ドージャーさんは元々鉄鋼職人で、60年代からパートタイムでナイフを作り始めました。71年にエ-ジ-ラッセル(A.G.Russel)に誘われて、モーゼスナイフを
 「嫌になるほど」 作りました。 ナイフ作りに嫌気が差し、鉄鋼業に戻りましたが、その後、再度A.G.ラッセルに戻り、またしばらくモーゼスの製作を続けました。 
  しばらくして...時間を掛けてブレードをぴかぴかに磨き上げる、使われないコレクター向けのナイフよりも、
   仕上げにあまり時間をかけないが、実用に優れた、使われるハンティングナイフを作りたい、作ろう! と思い立ち独立することにしました。
  当時のどージャーさんが作るナイフは、年に数本は綺麗なナイフを作るが、ほとんどのナイフは低価格の”使われる”ハンティングナイフです。 
  今現在は、会社ドージャナイブズでナイフは作られていますが、 このナイフはまだご自身で作っていた頃のカスタムナイフです。



                 TOP  へ  ジャンプ
   

 Mickael Franklin マイク フランクリン  HAWG  Knife  カーボン・チタンハンドル 刃長約:9.5cm 全長約:22.3cm 刃厚約:3.5mm
  ¥66000税込\55000 Blade Show 2018 Sold
 




  

 Zieba MS3 マンハッタン スペシャル フリッパー 、Hymer ダマススチール ハンドル:チタン 刃長約:6.8cm 全長約:16.5cm ミントコンディション
  ¥50000(税込¥55000)Sold 2016年ブレードショウで “the Best New Maker” 賞。 新人賞になるのかな?   Flips So Good !








                 TOP  へ  ジャンプ
     Vintage S.R. Johnson

 オールド S. R. Johnson スタッグ スキナー 刃長約7.5cm 全長約17.9cm 刃厚約:5mm Mint condition¥176000税込 Sold

 オールドS.R.ジョンソンナイフです。
   写真ではわかりませんが、かなり存在感のある一品です。 持って見れば直ぐにわかります。 そうは思わない方もいらっしゃると思いますが、こればかりは、
   そう感じない方は残念、と思ってしまうくらいです。 実物を手に取ったらこの値段が理解できます。
 ジョンソンのこのデザインだからなのか、それともジョンソンの削りの巧さなのか。このホローグラインドは、なにかちがうモノを感じさせます。
多分 5mm厚のブレードの迫力がそう思わせているのかもしれません。 さらに、このフルテーパドタングも、なんか綺麗なのです。テーパーが綺麗ってなんかおかしな話ですが、
  10cmのハンドル内で迫力の5mm厚から0.7mmに絞った姿が美しいのです。  
    是非 実物を見ていただきたい。 




  ¥175000 税込
   

 Bastinelli Knives イノセント プッシュナイフ 刃長約:4.4cm 全長約:9.1cm  受託品
  鋼材:Bohler N690 PVDコート ¥8500 (税込¥9350)  Sold

                 TOP  へ  ジャンプ
   

 Duane Dwyer Custom  SNG: Hissatsu Tanto  Tuxedo Damascus/Titanium 刃長約:9cm 全長約:20.7cm
 ドゥエイン・ドワイヤー カスタム SNG ヒッサツタントー タキシードダマスカス チタンハンドル 
  ¥150000(税込¥165000)  \127500税込  Sold

  Duaneさんの名刺に、Professor, Gracie Barra Brasioian jiu jitsu US Marien と入っていた。
   Duaneさんは、マリーンのブラジリアン柔術のインストラクター のようですね。


   ダンディですねぇ。 おしゃれ度 ナンバーワン!






                 TOP  へ  ジャンプ
   

 Kaj Embretsen 氏の カスタム Puukko ナイフ(北欧ナイフ) エンブレッセン氏 は世界で有名なスウェーデンのダマスカスメーカです。すごく綺麗なダマスカスナイフを作ります。 
    刃長約:11.2cm 全長約:21.7cm 刃厚約:4mm  鋼材:15N20 と 1778 炭素鋼の3枚鋼 
  ¥110000 (税込¥121000)  New from dealer  Sold 


  シースもトップクラスの出来です ↓


 大昔、ブレードショウで、Embretsen氏は私に突然話かけてきました。 なぜ私のダマスカス鋼は日本で売れていない? と聞くのです。 私を日本で有力なディーラーと勘違いしたのです。
 後で日本人作家の人たちに、エンブレッセン氏とビジネスの話をしたと話したら、皆 「やめとけ!」 の一言。  なんとも、 日本ナイフ会のドンを敵に回すから、でした。 Oh My GOD !    

   

 HOM Design  ”キメラ” バタフライナイフ  ”プレミアム バリソン” で有名になりました Jerry Hom 氏が作る バタフライナイフです。 
 (欧米ではバタフライナイフを ”バリソン” と呼んでいます。 バタフライナイフと呼ぶ人はほとんどいません。)
 刃長約:12cm 全長約:26.7cm 鋼材:S35V  ハンドル:チタン+むらさきG-10 ライナー  ミント  プレミアム(高級)な バリソンは、い・か・が ?! 
   ¥36000 (税込¥39600)  ↓ハンドル内にラッチを仕舞える仕組み Sold     委託品 


                 TOP  へ  ジャンプ
    

  HOM Design   Basilisk Elite   PVD コート  鋼材:CPM-S35V  ハンドル:チタン  中古美品  ¥38000 (税込¥41040) Sold



  Ben & Lois Orford Knife

  ベン&ロイス オルフォード  01スチール ウッドハンドル  刃長約:8.3cm 全長約:19.2cm 刃厚約4mm ミントコンディション Sold
    ¥35000税込


                 TOP  へ  ジャンプ
    

 Sergey Rogovets 作  モデル:Obj113  鋼材:CTS-XHP アノダイズド チタンハンドル 刃長約:9.2cm 全長約:21.6cm
 ¥64300 (税込¥69444) ¥19990税込  委託品  Sold
                                     木目↓スペーサー




   

      Joe Kious 作  上: きれいなパール貝が綺麗にインレイされてます。 刃長約:   全長約:  ¥64000 (税込¥69120) 税込¥60000 Sold

             下: 全長約13.3cm 刃長約5.7cm  イングレーブ by Simon Lytton  ミント   Sold 税込八萬八千円
 


    Corbet  C.R.Sigman 

 シグマン スモールファイター (tencho勝手に呼称) 刃長約11.3cm 全長約23.8cm 刃厚約5mm  極上スタッグ  残念ながらタング↓にサビあり 
   Sold


  ¥40000 (税込¥43200)
                TOP  へ  ジャンプ
   Steve Voorhis  

 Steve Voorhis  サブヒルトファイター サビ跡あり 未使用?  全長約16.3cm 刃長約29.2cm ¥30000 (税込¥32400) Sold   委託品



   David Beck WSK 

 David Beck WSK モデル2 ジェネレーション2 01スチール(炭素鋼) ブラックマイカルタ スカウトシース キズ少々 美品¥125000(税込¥135000) 委託品
  刃長約16.2cm  全長約31.2cm 刃厚約6mm   Sold



   

  Robert Terzuola  ATCF 初期の作品  ミントコンディション Sold 委託品   税別 ¥106000  (税込¥114480) (~6/20)  



                TOP  へ  ジャンプ
  

 Survive Knive GSO 5.1 中古 鋼材:CPM 3V 全長約26.9cm 刃長約14.6cm ビーズブラスト仕上げ グリーン?キャンバスマイカルタ がっちりシース 税込¥17000
                 刃は鈍ってますが、砥ぎは入っていません。   Sold
 
 
 Dave Beck WSK ( Wilderness Survival Knife ) 映画 ハンテッドのトラッカーナイフ のカスタムメード です。そしてオリジナルシース! 弐拾壱萬円
 初期型 Gen1 フルタング 映画のナイフもフルタング。テーパードタングではありません。刃長約16.2cm 全長約31.1cm ブルーイング仕上げ 01スチール

     量産品のRed Scorpion WSK と全然違います。 重量感、仕上げ...  カスタムの大 迫力 !   売れました。
 
 

.
                TOP  へ  ジャンプ
 

 Ken Onion カスタム " Ripple " コロンビアリバーの量産モデルで有名。 Wall Mart のセールで$30で売られて騒がれてますが、これがそのカスタムです。 Sold 拾弐萬円
   (割引対象外)

.
 

  Brian Flud 作  アニメフリッパー ?  と名付けようか。  or イルカフリッパー?  ちょっとイルカに見えませんか ?  th
                 鋼材:154CM  チタンハンドル 彫刻     売れました。  
                                            


 

 Erret Callahan 作  黒曜石ナイフ + 恐竜彫刻(Velociraptor ヴェロキラプトル)  売れました。   七萬八千円 
 黒曜石 刃は肉が切れます。黒曜石をきれいに丁寧に彫刻してあります。写真のとおり、恐竜もリアルで素晴らしい彫刻です。刃長約22cm 全長約35.5cm デカイです。



                 TOP  へ  ジャンプ
  デジカメ By オールド オリンパス Camedia C-2020 ↓ バカチョンでも、「たまに」良く撮れる。                                      委託品

   Ron Lake ロン・レイク テールロック フォルダー Tail Lock Folder 弐拾弐萬五千円  オぉ! ワンダフルの一言。 Sold

 
 

  Mike Franklin  4” Hawg folder  チタンライナー カーボンハンドル  ミント 
                                      Sold 

  

バリーウッド Barry Wood Classic ブラックマイカルタ 刃長8.6cm 
   税込¥39500  (税込¥42660) Sold
 

J.W.Smith フォルダー 全長約17.5cm刃長約7.5cm 中古美品Sold 五萬八千円
 J.W.Smith Folder JWS作の小ぶりのフオルダーはなかなか気に入ってます。

 

William Henry custom  Sold
 ハンドルの魅力もさながら、ブレードの透き通るようなブラックが
  なんともいい。 カスタムシリーズを始めた最初期の作品。
   やはり、初期モノはいい...!
 
  
 グレッグ・ライトフット カスタム  ”フル コンタクト ファイター” のプロトタイプ             ↑ Prototype の刻印
   全長約22.7cm 刃長約9.7cm  刃厚約4mm  刃幅約3cm ハンドル厚約1.5cm  売れました。 Sold

  
      分厚い チタンライナー にカーボン のハンドルです。

                TOP  へ  ジャンプ
 
 
 ファイルワーク
 2006年ブレードショウで見つけたナイフ。 作者忘れました。 マストドン アイボリ インレイ ダマスカス 刃長4cm 税込¥75000 Sold
   綺麗な紫です。
           ←ライナーにもファイルワーク   

  Jim Burke   Jim Burk
  
  
  四萬四千円  Sold 全長役15.5cm                              四萬円   全長役15.5cm ストーンウォッシュ仕上げ Sold  

           刃のwave削りがなんかいいんですが。 小ぶりで愛嬌あります。 

 
  Curtis Knives  Warren Thomasの友達らしい。 Sold

   Curtis Knives  八萬八千円                  ハンドルもこってますねぇ。 ↓↓ 宇宙船のような... ↓トリガー
  
              ↑ いかにもトリガー                  ↑クリップはシューティングサイトのイメージでしょうか。 

 
   Curtis Knives    Sold 四萬円


                 TOP  へ  ジャンプ
 
   r
 マスター D.E. Henry 10インチ ボウイ    1969年? 1959? 制作   1970年代の アメリカで 4000ドル していた ナイフです。 売れました。 Sold
    全長約38.3cm  刃長約25cm  刃厚約1cm             この角角デザイン。 ひし形楕円の、↑真鍮インテグラルヒルト。いい色してます。いい形してます。
      アーキテクチュラル、  D. E. Henry Bowie が こ・れ・だ!! ですかねぇ。                       またこのtapered黒ハンドルがたまらんのだよ。
                                                  1cm厚のボウイの迫力は握ってみなくてはわからない。  一時でも持ててよかった...
  ヒルトに:Floyd A Rammel   
  シースに:Comr. Flintlock Champion
        CSMLRA Fresno 1959       ←1959年に作られたかも?
        Presented by OLE OLSON

たぶん訳:                                  
  FresnoにあるCSMLRA(多分:California State Muzzle Loader Rifle Association) が主催した、1959年のフリントロック(射撃か猟?) 大会で
  Floyd A Rammel さんがチャンピオンになり、その賞品として このD.E.Henry氏のBowieナイフが CSMLRA の理事長(?) (有名人?)OLE OLSON氏によって手渡(表彰)された。



 D.E. Henryについて: Blade Forums、2014  投稿より

" DE Henry
Legendary Bowie Knife Maker
Daniel Edward Henry
1924-1993

In the early 1950's, the Custom Knife renaissance was just in it's infancy with a handfull of makers like WF Moran, Bo Randal, Rudy Ruana, Scagel and DE (Ed) Henry,
developing the sytles and techniques that furture knifemakers would follow. This ws the "pre-dawn" period of custom knifemaking as we know it today.

Henry actually makes his first knife in 1943 while a Marine stationed on a navy transport ship. Back home his interest continued to grow and by the early 1950's
he began making his first Bowie knives --- later to be know as his "First Generation".
These knives were influenced by the prevailing Bowie concerpts of the time, --- big, clunky, heavy blades with large brass lugged crossguards
similar to the Randall Smithsonian Bowie. In all, 55 knives were numbered in this "First Generation".

By the mid 1950's, an important transformation occurred --- Henry met famed Bowie collector, dealer and authority Robert Abels in New York.
He had the opportunity to view and study authentic Bowie knives from the 19th Century. "Nobody knew anything about Bowies in those days" were his own words.
This was the beginning of the Henry "Second Generation" of Bowie knives patterned after historical 19th Century Sheffield models.
"He taught us what Bowie knife should look like" commented J.R< Edmondson, noted Bowie author and historian. Henry continually studied and researched his subject.

It is from this time that the Henry Legend would take off and the manyy "firsts" that he introduced would evolve. It is quite a list:
1. First maker to flat grind his blades (1943)
2. First to do a hand stin rubbed lateral finish -- no power buffing
3. First to serial number his knives. The only exceptions were a small number of prototypes and a fe wmade as his own personal knives.
4. First to grind 440C chromium alloy steel (1960)
5. First to use stainless for guards on his hunting knives.
6. First maker to be associated with the bowie knife and first to fully research authentic Bowie patterns.
7. First to reporduce Sheffield 19th Century Bowies with traditional scabbards mounted with nickel silver tips, throats and frog studs (1955)
8. First to inlay nickel silver escutcheon plates (1956)
9. First to use stainless for the mounts on his Sheffield scabbards (1976)

It was in this period that his hallmarks of quality and workmanship became fully realized. Every bevel was crisp, symmetrical and absolutely true.
Every jucntion was meticulously fitted. He educated both collectors and fellow knifemakers about authentic Bowie knife patterns.

Hew viewed the knife as an art form unto itself and not a canvas for garish embellishment. He "transformed a craft into ta legitimate art form"
and established the standards of qualtity that all makers would strive to emulate.

His knives were rich in the history of the 19th Century but their true significance would be their inflkuence in both design and quality
on the history of 20th Century (and beyond) custom knifemaking.

By 1968, Henry had moved to his 3 1/2 acre home and shop in the foothills of California gold rush country on a high ridge overlooking the tiny community of Mountain Ranch.
Here, in the solitude he enjoyed, his knifemaking would flourish.
In 1971, he introduced his "Third Generation" of Bowies patterned after pre Civil War American knives and named for American wildlife. Names like "Old Lobo", "Old Grizzly", etc.

In 1974, his "Fourth Generation" was begun, influenced by straight back "Rezin" style blades and those of the Philadelphia cutler, Henry Schively, featuring
a false upper bevel cut on one side of the blade only.
These Bowies, named after historical sites of Texas history include "Bejar", "San Saba", "Conception" etc.

By this time, his fame was well established and wait times stretched to 6-7 years with the final price based on market conditions at the time of completion.

The final series, his "Fifth Generation" arrived in the early 1980's and was patterned after th e19th Cenury San Francisco Bowies made famous by
makers like Will & Finck and Michael Price with names from that period.

In all, his producion was limited to 466 knives make over a 40 year career. The time consuming hand work often exceeded 100 hours
limiting the number of finished knives to 10 or 12 per year.

He was fiercely individualistic self taught, self styled maverick, often described as àrrogant, eccentric, ego centric and antagonistic`but
he was also cpable of genuine warmth with those he respected and his wife and son whom he dearly loved.
With health issues starting to become a problem, Henry retired from knifemaking in 1991 and after a battle with illness passed away in 1993.

His importance and influence both on the delvelopment of custom knifemaking and the understanding of historical Bowie knives cannot be over emphasized.
The legend of D.E. Henry lives on in the classic knives he created in his ground breaking career,."

The Schively Bowie at its listed price was $800 but may have sold for more at the time
due to DE's policy as his career advanced of charging current prices on his orders that had a 7 year waiting period.


 
 
 Kirby Lambert ”The Inferno” インフェルノ  八萬八千円  全長約21.4cm 刃長約9.5cm  S30V  カーボン・ホワイトマイカルタハンドル 売れましたSold

 
                TOP  へ  ジャンプ
 
  nc
 Michael J. Smith 作 Fighter Ivory Handle   売れましたSold
  かっこいいですね。 いいデザインです。  ミラーポリッシュ


← ひび割れ部分は樹脂がつめられて、きれいなプロの処置がされています。


















 

トニーボーズ Tony Bose シースナイフ(めずらしい)¥60000 SOLD
  刃長約60.5mm  "Prototype"と刻印有り 

 

・ケン オニオンKen Onion  七萬円税込

J.W.Smith and Liong Mah  Sold
  ☆ Smith&Wesson Border Guard knife のオリジナルカスタム



 
 Kit Carson  大特価  売れましたSold

 
 Simonich Mid Tech S30V 全長約22.5cm ニアミントコンディション Sold

                TOP  へ  ジャンプ
 


     販売中の海外作家 カスタムナイフ

      ↑ TO Currently  selling custom knives  oversea maker